Intro

One famous brand of vaporizer that has a lengthy battery life is JUUL. It would help if you used the USB charger that typically comes with the JUUL kit to charge the battery each time it runs low. 

But you don't have to worry if you misplace it because you can quickly construct your charger from a phone cord. The process of how to charge a JUUL without a charger will be covered in this tutorial.

What Is Juul Pod?

Juul pods are the most well-liked e-cigarette among them, especially among young adults and teenagers. But since JUULpods' high nicotine concentration has been connected to some possible health problems, concerns have been expressed about it. CLICK HERE TO BUY JUUL BRAND VAPE

It is a nicotine delivery system disguised as a fancy piece of technology. A Juul pods is a small cartridge that contains a liquid concoction infused with nicotine. Yes, nicotine is the addictive substance that keeps you crawling back for more.

How to Charge a Juul without a charger Step By step?

Step 1: Purchase a USB cord or cable with a USB plug

Use any unused Android charger or smartphone connector to charge your JUUL. Even a micro USB charger will work. Just locate a cable that fits your JUUL's plug type to get started.

Step 2: Ensure the USB cable is cut short

Make sure it's unplugged before using any phone charging cord. Using scissors, trim the end of the cable that connects to your phone. Throw away the cut end once you're done.

You risk being shocked if you cut the wires while they are connected.

Step 3: Get rid of these two wires:

Sort the black and red phone cords from the other cables by untangling the wires. Scrape off the plastic coating by placing the edge of your scissors on one of the wires. Take off just 1/4 to 1/2 inch (0.64 to 1.27 cm) from the end of the wires.

Step 4: Remove the red and black wires

After cutting one end, four wires will be visible: white, green, black, and red. With caution, remove the black and red cables while keeping them apart. 

Using wire cutters or scissors, cut off a quarter to half an inch of the plastic covering from each end of these wires. Take care not to sever any of the white or green cables. Remember that the black wire may occasionally be housed in a silver shell.

Step 5: Twist the Metal Filaments:

Twist the metal strands inside after removing the plastic from the red and black wires. They are thus kept intact and undisturbed, guaranteeing their quality and longevity. If you keep it neat, it will last longer and be more efficient.

Step 6: Tape the wires in place:

Once your JUUL's light starts to blink, adjust the wires. After it flashes, wrap electrical tape around the base to firmly anchor the cables. Give your JUUL about 60 minutes to charge fully.

Step 7: Plug the cable into a USB wall charger:

Instead of using a laptop, test your homemade JUUL charger by plugging it into a wall or portable power bank. Adjust the wires when the JUUL light flashes to indicate that it is charging. Use electrical tape to secure. 

Green is high charge, yellow is medium, and red is low charge. For roughly an hour, how to charge Juul without a charger. 

Try a different power source if there is no flashing. To reduce the fire risk, keep an eye on it, never leave it unattended, and unplug it when unused. Exercise caution, as exposed wires could be dangerous.

How Do You Manually Charge Juul?

It would help to have a cable with the appropriate plug to charge a JUUL manually. Carefully cut off one end to reveal the red and black wires. These wires should be stripped, the metal twisted inside and positioned precisely.

Never use a laptop; connect the wire to a wall charger or power bank. Move the cables around until the JUUL light starts to flash. Using electrical tape, secure the wires around the base.

Give it an hour or so to charge. Try a different power source if the light doesn't flash. To reduce potential risks, never leave it unattended and always unplug it when finished. Take care when handling exposed wires.

How To Make A Juul Charger With An Android Charger?

To make a JUUL charger without an Android cable:

1. Find any unused cable

2. Cut off one end carefully.

3. Strip and twist red and black wires.

4. Connect to a wall charger or power bank.

5. Reposition wires until the JUUL light flashes.

6. Secure with electrical tape.

7. Charge for an hour.

8. Avoid laptops for safety.

9. Don't leave unattended.

10. Unplug when done.

Where To Buy Juul Pod Vape in Dubai?

There are many online vape shops Dragon Mart in Dubai, but vapdazzle is among the best. Why vpdazzle is the best? They have a wide selection of high-quality, safest vaping devices like Juul Devices, Juul 2 pods and accessories. 

Vapdazzle is known for its commitment to customer service, authentic products, fair pricing, and compliance with local regulations. They guarantee fast delivery within 1 hour in Dubai and accept various payment methods. 

Vp Dazzle offers competitive prices and a loyalty card program for cashback. They also provide comprehensive product information to help customers make informed choices.

FAQ:

Is a JUUL rechargeable?

Yes, the Juul device is rechargeable.

Can I charge my vape with a phone charger?

No, using a Smartphone charger to charge your vaporizer is not advised. The specifications and power needs of mobile chargers and vape devices differ, and using an incompatible charger could endanger your safety or harm your vape device.

Can I charge JUUL with the pod?

No, you cannot charge a JUUL with a pod. Pods are meant for holding e-liquid and are not designed to recharge the JUUL device.

Conclusion:

When you want to know how to charge a Juul without a charger, Charge your JUUL on a flat surface, like a calm sea, for smooth sailing. Tape the wires securely—like a trusty anchor—to keep things steady during charging. 

But beware, don't play with lightning! Avoid cutting or twisting plugged-in cables; it's like avoiding a live wire dance. Safety first.